Hydraulic Anchor

Hydraulic Anchor

Facebook
Twitter
LinkedIn
Category

The Hydraulic Set Tubing Anchor Catcher is a pressure actuated, fully retrievable anchor catcher designed to hold the tubing string in tension or compression. No tubing manipulation is required in order to set the anchor. Once set, bi-directional slips anchor the tubing to prevent upward or downward movement during rod pumping and to prevent tubing from falling down. Applying tubing pressure against a temporary tubing plug run below the anchor catcher sets the ancho catcher. The anchor catcher is released by pulling sufficient force to shear the release screws. The number (up to 12) predetermines the shear value (4,000 lb each) of the releasing mechanism. Increases pump efficiency, improves operating costs by reducing maintenance and down time caused by tubing or sucker rod wear. Run anchor catcher to desired depth and space out completion using normal procedures. If an expendable seating sub is used to temporarily plug the tubing, drop the bronze setting ball. Allow substantial time for the ball to gravitate to the ball seat.

This Model is drifted with the corresponding API tubing drift size.

NOTE: Additional size, weight, end connection etc. are also available on request.

Description

Advantage and features:

  • Provides no-turn feature for Progressive Cavity Pump operations.
  • Increases pump efficiency and helps prevent the tubing from backing off
  • No Rotation required to set the anchor.
  • Straight Pull Shear Release.

Parameters:

Type Suitable casing
(mm)
O.D.
(mm)
I.D.
(mm)
Length
(mm)
Pressure
(MPa)
Usel load
(kn)
Connection
KYLM-110 118.2-124.3 110 50 983 40 45 2-7/8''EU
KYLM-114 121.1-124.3 114 60 983 40 50 2-7/8''EU
KYLM-116 121.1-127.3 116 62 983 40 50 2-7/8''EU
KYLM-150 157.1-164.2 150 75 929 40 68 3-1/2''EU

Contact Us

Send Message

Contact Us

Completed This Form To Get Your Project Solution And Quote.

Open chat
Hello 👋
Can we help you?