Torque Anchor

Torque Anchor


This Model is drifted with the corresponding API tubing drift size.

NOTE: Additional size, weight, end connection etc. are also available on request.


Torque anchor is used to take the reactive torque given by the friction created between the rotor and stator of the pump with progressive cavities, to prevent the tubing from unscrewing. It is mounted under or just above the pump. It uses the principle of a mandrel with two slips (one floating, one stationary) camming in opposite directions anchoring the tubing string to the inner casing wall. The Extra Bypass is a standard feature of the Torque Anchor that offers a larger area around the torque anchor for gas bypass and to discourage sand bridging. By adding a set of drag blocks, the damaging harmonics are absorbed before reaching the anchor blocks that are engaged onto the casing.


Type O.D.
Nozzle O.D.
Max tensile force
Max Torque
HAJ-105 105 38 1340 12.7 NC31
HAJ-121 121 38 1400 17.65 NC38
HAJ-156 156 50 1500 35 NC50
HAJ-159 159 50 1600 35.5 NC50
HAJ-178 178 80 2000 40 5-1/2FH
HAJ-203 203 90 2000 44 6-5/8REG

Contact Us

Send Message

Contact Us

Completed This Form To Get Your Project Solution And Quote.

Open chat
Hello 👋
Can we help you?